EL5610 is a high-integration and medium-capacity cassette EPON OLT designed for operators access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network——based on Ethernet Passive Optical Network (EPON) and China telecom EPON technical requirements 3.0. EL5610 series possesses excellent openness, large capacity, high reliability, complete software function, efficient bandwidth utilization and Ethernet business support ability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction.
EL5610 series provides 4/8/16*downlink 1000M EPON ports, 8*GE Ethernet ports and 2*10G uplink ports. The height is only 1U for easy installation and space saving. It adopts the advanced technology, offering efficient EPON solution. Moreover, it saves a lot cost for operators for it can support different ONU networking.
| ITEM | EL5610-08P |
| Switching Capacity | 128Gbps |
| Forwarding Capacity(Ipv4/Ipv6) | 95.23Mpps |
| Service Port | 8*PON port, 8*GE port, 4*10GE SFP+ port |
| Redundancy Design |
Dual power supply
Support double AC input, double DC input and AC+DC input
|
| Power Supply |
AC: input 90～264V 47/63Hz;
DC: input -36V～-72V;input
|
| Power Consumption | ≤45W |
| Dimensions (Width x Depth x Height) | 440mm×44mm×311mm |
| Weight (Full-Loaded) | ≤3KG |
| Environmental Requirements |
Working temperature: -10°C～55°C
Storage temperature: -40C～70C
Relative humidity: 10%～90%, non-condensing
|
| ITEM | EL5610-08P | |
| PON Features |
IEEE 802.3ah EPON China Telecom/Unicom EPON Maximum 20 Km PON transmission distance Each PON port supports the max. 1:64 splitting ratio Uplink and downlink triple churning encrypted function with 128Bits Standard OAM and extended OAM ONU batch software upgrade, fixed time upgrade, real time upgrade PON transmit and inspect receiving optical power PON port optical power detection |
|
| L2 Features | MAC |
MAC Black Hole
Port MAC Limit
32K MAC Address
|
| L2 Features | VLAN |
4K VLAN entries Port-based/MAC-based/protocol/IP subnet-based QinQ and flexible QinQ (StackedVLAN) VLAN Swap and VLAN Remark PVLAN to realize port isolation and saving public-vlan resources GVRP |
| L2 Features | Spanning Tree |
STP/RSTP/MSTP
Remote loop detecting
|
| L2 Features | Port |
Bi-directional bandwidth control
Support static and LACP dynamic port aggregation
Port mirroring
|
| Security Features | User’s Security |
Anti-ARP-spoofing
Anti-ARP-flooding
IP Source Guard for creating IP+VLAN+MAC+Port binding
Port Isolation
MAC address binding to the port and MAC address filtering
IEEE 802.1x and AAA/Radius authentication
|
| Security Features | Device Security |
Anti-DOS attack(such as ARP, Synflood, Smurf, ICMP attack), ARP detection, worm and Msblaster worm attack SSHv2 Secure Shell SNMP v3 encrypted management Security IP login through Telnet Hierarchical management and password protection of users |
| Security Features | Network Security |
User-based MAC and ARP traffic examination Restrict ARP traffic of each user and force-out user with abnormal ARP traffic Dynamic ARP table-based binding IP+VLAN+MAC+Port binding L2 to L7 ACL flow filtration mechanism on the 80 bytes of the head of user-defined packet Port-based broadcast/multicast suppression and auto-shutdown risk port URPF to prevent IP address counterfeit and attack DHCP Option82 and PPPoE+ upload user’s physical location Plaintext authentication of OSPF, RIPv2 and BGPv4 packets and MD5 cryptograph authentication |
| Service Features | ACL |
Standard and extended ACL;
Time Range ACL;
Flow classification and flow definition based on source/destination MAC address, VLAN, 802.1p, ToS, DiffServ, source/destination IP(IPv4/IPv6) address, TCP/UDP port number, protocol type, etc;
packet filtration of L2～L7 deep to 80 bytes of IP packet head;
|
| Service Features | QOS |
Rate-limit to packet sending/receiving speed of port or self-defined flow and provide general flow monitor and two-speed tri-color monitor of self-defined flow Priority remark to port or self-defined flow and provide 802.1P, DSCP priority and Remark CAR(Committed Access Rate), Traffic Shaping and flow statistics Packet mirror and redirection of interface and self-defined flow Super queue scheduler based on port or self-defined flow. Each port/ flow supports 8 priority queues and scheduler of SP, WRR and SP+WRR. Congestion avoid mechanism, including Tail-Drop and WRED |
| Service Features | IPv4 |
ARP Proxy DHCP Relay DHCP Server Static Routing RIPv1/v2 OSPFv2 BGPv4 Equivalent Routing Routing Strategy |
| Service Features | IPv6 |
ICMPv6 ICMPv6 Redirection DHCPv6 ACLv6 OSPFv3 RIPng BGP4+ Configured Tunnels ISATAP 6to4 Tunnels Dual stack of IPv6 and IPv4 |
| Service Features | Multicast |
IGMPv1/v2/v3 IGMPv1/v2/v3 Snooping IGMP Filter MVR and cross VLAN multicast copy IGMP Fast leave IGMP Proxy PIM-SM/PIM-DM/PIM-SSM PIM-SMv6, PIM-DMv6, PIM-SSMv6 MLDv2/MLDv2 Snooping |
| Reliability | Loop Protection |
EAPS and GERP (recover-time <50ms) Loopback-detection |
| Reliability | Link Protection |
FlexLink (recover-time <50ms);
RSTP/MSTP (recover-time <1s);
LACP (recover-time <10ms);
BFD;
|
| Reliability | Device Protection |
VRRP host backup;
1+1 power hot backup;
|
| Maintenance | Network Maintenance |
Port real-time, utilization and transmit/receive statistic
RFC3176 sFlow analysis;
LLDP;
GPON OMCI;
Data Logging and RFC 3164 BSD syslog Protocol;
Ping and Traceroute;
|
| Maintenance | Device Management |
Console port, Telnet, SSH management;
Out-band management;
SNMPv1/v2/v3;
WEB RMON (Remote Monitoring)1,2,3,9 groups MIB;
NTP;
NGBNView network management;
Power Failure Alarm;
|
| ITEM | PRODUCT DESCRIPTION |
| EL5610-08P | 8*PON port，8*GE port，4*10GE SFP+ port，double AC/DC power supply |
| NG01PWR100AC | Power module for NG01PWR100AC |
| NG01PWR100DC | Power module for NG01PWR100DC |
86-16675375925 
info@lycomgroup.com
